SAE Automatic Sampler

Part #: TBD

Get Started

Request A Quote

Not What You're Looking For?

Contact Us
Designed for particles up to 3/4 inch (19mm), the ISOLOK SAE particle sampler ensures that your samples are representative of your entire process without degrading or shearing the sample.
This automatic sampler uses a four-inch stroke cylinder to obtain samples from heavy-walled vessels.

The ISOLOK sampler's design uses compressed air to grab a fixed amount of product at set intervals. The product is then discharged by gravity to a sample container.

  • The SAE powder sampler is designed to capture a 90 or 100cc sample.
  • The sampler is available in versatile seal options to meet your process needs.
  • Installation and maintenance is a breeze with the sampler's heavy duty 3-inch tri-clamp ferrule.

Sample volume per cycle 90 or 100 cc
Maximum particle size 0.75 in (19 mm)
Maximum cycle frequency 10 strokes per minute, depending on application
Materials 316 stainless steel; other materials available
Actuator seals filled Teflon®; other materials available
Static seals fluoroelastomer; other materials available
Plunger seals polyurethane, EPDM rubber; other materials available
Sample temperature range -40°F to 575°F (-40°C to 302°C), depending on seal material and duty cycle
Ambient operating temperature range -5° to 131°F (-20° to 55°C) depending on seal material
Line mount adapter type 3 in (7.6 cm) clamp ferrule
Compressed air requirement 2 SCFM at 30 to 120 psig (2.1 to 8.3 barg)
Dimensions 18.2 in x 6.5 in (462 mm x 165 mm)
Shipping weight 29 lb (13.2 kg)

Related Resources

Learn more about how the SAE Automatic Sampler can benefit your application with the following resources. 

Need Something Else?

Review some other related products that could help your current application. 

Contact our Professionals

Not What You're Looking for?

Contact Us