SAG Automatic Fixed Volume Sampler

Part #: TBD

Download Specs

Email Specs

Get Started

Request A Quote

Not What You're Looking For?

Designed for thick slurries such as raw municipal sludge and waste acids, the ISOLOK SAG slurry sampler ensures that your samples are representative of your entire process and operators are protected from potentially hazardous products.

This automatic sampler is made with 316 Stainless Steel components to meet different process applications.
The ISOLOK sampler's design uses compressed air and a controller to force a plunger into up to 300 psi (2.7 bar) pressurized processes for complete representative sampling.

The ISOLOK SAG sampler has a variety of options such as port closures, different container types, sampler enclosures, etc.
The SAG slurry design is available with three different models for sampling fixed volumes of 120 cc or 200 cc per sample cycle.

Sample volume per cycle	120 or 200 cc
Maximum cycle frequency	6 strokes per minute, depending on application
Maximum particle size	5/8 in (16 mm) \| 7/8 in (22 mm)
Line mounting options	MNPS thread, tri-clamp, instrument hub, bolted hub 2
Materials	316 stainless steel; other materials available
Cylinder seals	Halar®, TFE or custom
Plunger seals	TFE, polyurethane, EPDM rubber, FFKM or custom
Compressed air requirement	2 SCFM at 90 psi (.05 m³/minimum at 6.2 bar)
Dimensions	16.69 in x 6 in (42.4 cm x 15.25 cm)
Shipping weight	58 to 66 lb (26.3 to 30 kg)